Wi-Fi is a wireless internet connection type that is known to provide convenience to its users. It carries internet signals through airwaves, which makes it susceptible to disruption in many ways. From microwave ovens and baby monitors to any Wi-Fi-enabled device can interfere with its signals, reducing its speeds and bandwidth. Therefore, in this article, we will introduce to you the most effective ways to minimize Wi-Fi interference. Keep reading till the end to find out!
Cox high-speedhigh speed internet is well suited for those who wish to stream and surf. Without experiencing unexpected slowdowns or signal issues. However, if you haven’t have not switched to cable internet yet. Then we have shortlisted a few tips. And techniques for you to fix your Wi-Fi network and limit the number of interferences on the network:
Relocate Your Router
The speeds from a Wi-Fi network are influenced by the position of your router. Placing the router in a bad location can hinder the signals from flowing through the air. So, if you want to confirm if the signals are being disrupted. Due to your router’s location, then you should relocate your router for some time. Place it near your master phone socket to resolve any issues related to its wiring.
Also, avoid placing it on a metal shelf or a brick wall. As these places can affect the signals you get. Once you have set it up in a new location. See if you could notice any difference in its speeds and signal strength. This indicates that the signals transmitted by your Wi-Fi network are being disrupted.
To resolve this issue, you need to change the location of your router. Instead of placing it in a corner. choose a central location in your home to allow its signals. To transmit evenly across the house. This way, you can reduce the distance between your router and your device. which will instantly increase the Wi-Fi signal strength on your device.
Reduce Wi-Fi Network Interferences
Sometimes, the Wi-Fi network itself becomes a barrier in delivering the right speeds to the devices that are connected to it. For instance. if your Wi-Fi network is not configured properly or consists of a manufacturing defect, then these issues can influence your signal strength.
In an ideal case, two access points should have at least 15-20% of coverage overlap between them. If there is little to no overlap between two access points. then this indicates a bad signal strength on the network.
On the flip side, too much coverage overlap between two access points can result in co-channel interference that can potentially lead to many other issues with your internet connection. Hence, you must ensure that the access points in your home or office network are situated at a safe distance from one another to avoid interference with your network.
Switch to another Wi-Fi Frequency Band
Wi-Fi routers come with built-in technology that allows users to run them on two different frequency bands: 2.4 GHz and 5 GHz. For example, if your router is currently running on the 2.4 GHz band, it may fail to provide the speeds and signals needed to carry out a specific task.
In such situations, you should consider setting your router to the 5 GHz band, as it allows data to travel at much faster speeds than the 2.4 GHz band. On the other hand, if your router is running on the 5 GHz band yet fails to meet your minimum speed requirements, then you may need to switch to the 2.4 GHz band for better coverage over longer distances.
Change Your Internet Service Provider (ISP)
If you have tried all the techniques listed above. Yet you are encountering interference issues from your Wi-Fi network, then you may need to switch to another ISP that promises reliable speeds. Cox Communications offers a wide range of cable internet deals to provide uninterrupted speeds that are not affected by the distance from the router. It makes use of cox cables to send internet signals. To all the devices connected to it, which makes it ideal for users that are looking for a stable internet connection. So, instead of feeling frustrated about your disrupted Wi-Fi signals. Sign up for a cable internet plan that fits your speed requirements.
The Bottom Line
Despite all the benefits that come with a Wi-Fi network. it can be quite annoying for users that require uninterrupted speeds for completing a task. Sometimes, a simple reboot can fix your Wi-Fi network. But this trick may not work on Wi-Fi networks that are susceptible to interferences by physical obstructions. From walls, furniture, and staircases to smart home appliances, various objects and devices can disrupt the signals you get. Therefore, we recommend you follow the abovementioned tips. To ensure that your Wi-Fi network remains free from all types of interference.